Descrizione
For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
Dati sulle prestazioni
| Tensione di alimentazione | +24 V DC (+18-30 V DC) |
| Monitoraggio della tensione | Yes |
Ingressi analogici
| Genere | Current |
| Numero | 4 |
| Risoluzione | 16 bits |
| Campo di misura | 0-20 mA or 4-20 mA |
| Precisione di misura | ±0.5 % of maximum measurement value |
| Tempo di conversione per tutti i canali | 1 ms |
| Monitor per rottura cavi | Yes |
| Filtro hardware | typically 1 kHz, low pass 3rd order |
| Filtro software | configurable |
Uscite analogiche
| Genere | Current |
| Numero | 4 |
| Gamma di uscita | 0-20 mA or 4-20 mA |
| Risoluzione | 12 bits |
| Tempo di aggiornamento per tutti i canali | 1 ms |
| Capacità di tensione di uscita | 50 µs + load * capacitive load (63 % of the end value)
100 µs + 2*load * capacitive load (86 % of the end value) 250 µs + 5*load * capacitive load (99 % of the end value) |
| Tempo di assestamento | ±0.5 % of maximum output value |
| Precisione |
Caratteristiche meccaniche
| Dimensioni | 12.5 x 104 x 72 mm (W x H x D) |
| Tipo di protezione | IP20 |
Numero articolo / certificazione
| Numero dell’articolo | 20-017-442 |
| Standardizzazione / certificazione | UL 508 (E247993) |
